产品

DI管的马鞍夹

产品编号：

DN60-DN300

该产品的主要功能是在整个管道安装并已经运行后暂时将分支管道或在管道的任何部分安装水龙头或水表。

特殊设计是允许的，欢迎与我们联系。

现在聊天

DI管的马鞍夹

产品编号：

DN60-DN300

该产品的主要功能是在整个管道安装并已经运行后暂时将分支管道或在管道的任何部分安装水龙头或水表。

特殊设计是允许的，欢迎与我们联系。

现在聊天

零件号	零件名称	材料	标准
1	身体	GGG50	EN1563
2	橡胶环	EPDM/sbr/nbr	ISO4633
3	腺法兰	GGG50	EN1563
4	螺栓和坚果	碳钢4.8/8.8，SS，DACROME	ISO898
5	完成层	融合键环氧树脂等	BS EN14901

简介和功能
1	适用于DI管道。
2	工作压力PN10/PN16。
3	最高温度-10°C至+70°C。
4	适用于饮用水（已批准WRA），回收的水和污水。
5	总角度偏差为+/- 3度。

符合标准
法兰钻孔	EN1092-2，EN1092-1，ANSI
涂层	EN30677
测试	EN12266-1

物品	规格（MM）
	∅	f	g	l	一个	L1	h
60~3/4”	60	155	3/4”	80	118	65	M12×90
60~1”			1”
60~1 1/4”			1 1/4”
60~1 1/2”			1 1/2”
80~1”	80	175	1”	80	138.5	75	M12×90
80~1 1/4”			1 1/4”
80~1 1/2”			1 1/2”
100~1”	100	195	1”	92	165	91	M12×90
100~1 1/4”			1 1/4”
100~1 1/2”			1 1/2 ”
100~2”			2”
125~1”	125	220	1”	92	193	104	M12×90
125~1 1/4”			1 1/4”
125~1 1/2”			1 1/2”
125~2”			2”
150~1”	150	245	1”	92	209	107	M12×100
150~1 1/4”			1 1/4”
150~1 1/2”			1 1/2”
150~2”			2”
175~1”	175	260	1”	92	243.5	129	M12×130
175~1 1/4”			1 1/4”
175~1 1/2”			1 1/2”
175~2”			2”
200~1”	200	276	1”	122	276	143	M12×140
200~1 1/4”			1 1/4”
200~1 1/2”			1 1/2”
200~2”			2”
250~1”	250	330	1”	122	333	174	M12×160
250~1 1/4”			1 1/4”
250~1 1/2”			1 1/2”
250~2”			2”
300~1”	300	380	1”	122	385	200	M12×180
300~1 1/4”			1 1/4”
300~1 1/2”			1 1/2”
300~2”			2”

1.This product is specially designed for connecting DI pipes. The connect range is from DN60-DN300. If the customer has special requirements we can design and manufactured. 2.The simplicity and versatility of this product makes the product very easy to install and the entire line can be installed in a running pipeline. It will avoid the shut down the whole pipeline line during saddles installation,which can bring great convenience to customers. 3.Product design and manufacturing in accordance with ISO9001: 2008 system. we use ductile iron material as the main body of product, surface corrosion materials is authenticated by WRAS certification. making it suitable for drinking water. 4.We provide gaskets of EPDM, NBR, and SBR, bolts and nuts of carbon steel and stainless steel, etc., long-term anti-rust protection. For this product we provide excellent protection from transportation, warehousing, anti-corrosion at site.

1.Check the saddle package, if any accessories was lost during transport. 2.Check the diameter and casting marks of the pipe and check the type of model of the saddle, to make sure you use the right products. 3.Thoroughly clean the pipe surface that will use the pipe saddle, brush suitable gasket lubricant for roughened pipes to ensure that the product is well sealed. 4.Loosen the saddle bolt to separate the two part of products. 5.Positioning saddle on the pipe, make sure thread outlet is in the correct position. 6.The bore holes of saddle’s two parts should be aligned to ensure the gasket is parallel to the pipes surface. 7.Tighten the bolt with a wrench as required. The bolt is evenly exchanged with a torque of 15-20 pounds / feet each time.