Produk

Penjepit pelana untuk pipa di

Nomor Produk:

DN60-DN300

Fungsi utama dari produk ini adalah untuk membuka pipa cabang atau memasang faucet atau meter air di bagian mana pun dari pipa sementara setelah penyelesaian pemasangan seluruh pipa dan sudah berjalan.

Desain khusus diizinkan, selamat datang untuk menghubungi kami.

Mengobrol sekarang

Penjepit pelana untuk pipa di

Nomor Produk:

DN60-DN300

Desain khusus diizinkan, selamat datang untuk menghubungi kami.

Mengobrol sekarang

Bagian No.	Nama bagian	Bahan	Standar
1	Tubuh	GGG50	EN1563
2	Cincin karet	EPDM/SBR/NBR	ISO4633
3	Flensa kelenjar	GGG50	EN1563
4	Baut & mur	Baja Karbon 4.8/8.8, SS, Dacromet	ISO898
5	Selesaikan lapisan	Epoksi ikatan fusi dll.	BS EN14901

Brief & fitur
1	Cocok untuk pipa DI.
2	Tekanan kerja PN10/PN16.
3	Suhu maksimum -10 ° C hingga+70 ° C.
4	Cocok untuk air minum (disetujui WRAS), air daur ulang dan limbah.
5	Total deviasi sudut adalah +/- 3 derajat.

Patuh Standar
Pengeboran flensa	EN1092-2, EN1092-1, ANSI
Lapisan	EN30677
Tes	EN12266-1

Barang	Spesifikasi (MM)
	∅	F	G	L	A	L1	H
60~3/4”	60	155	3/4”	80	118	65	M12 × 90
60~1”			1”
60~1 1/4”			1 1/4”
60~1 1/2”			1 1/2”
80~1”	80	175	1”	80	138.5	75	M12 × 90
80~1 1/4”			1 1/4”
80~1 1/2”			1 1/2”
100~1”	100	195	1”	92	165	91	M12 × 90
100~1 1/4”			1 1/4”
100~1 1/2”			1 1/2 ”
100~2”			2”
125~1”	125	220	1”	92	193	104	M12 × 90
125~1 1/4”			1 1/4”
125~1 1/2”			1 1/2”
125~2”			2”
150~1”	150	245	1”	92	209	107	M12 × 100
150~1 1/4”			1 1/4”
150~1 1/2”			1 1/2”
150~2”			2”
175~1”	175	260	1”	92	243.5	129	M12 × 130
175~1 1/4”			1 1/4”
175~1 1/2”			1 1/2”
175~2”			2”
200~1”	200	276	1”	122	276	143	M12 × 140
200~1 1/4”			1 1/4”
200~1 1/2”			1 1/2”
200~2”			2”
250~1”	250	330	1”	122	333	174	M12 × 160
250~1 1/4”			1 1/4”
250~1 1/2”			1 1/2”
250~2”			2”
300~1”	300	380	1”	122	385	200	M12 × 180
300~1 1/4”			1 1/4”
300~1 1/2”			1 1/2”
300~2”			2”

1.This product is specially designed for connecting DI pipes. The connect range is from DN60-DN300. If the customer has special requirements we can design and manufactured. 2.The simplicity and versatility of this product makes the product very easy to install and the entire line can be installed in a running pipeline. It will avoid the shut down the whole pipeline line during saddles installation,which can bring great convenience to customers. 3.Product design and manufacturing in accordance with ISO9001: 2008 system. we use ductile iron material as the main body of product, surface corrosion materials is authenticated by WRAS certification. making it suitable for drinking water. 4.We provide gaskets of EPDM, NBR, and SBR, bolts and nuts of carbon steel and stainless steel, etc., long-term anti-rust protection. For this product we provide excellent protection from transportation, warehousing, anti-corrosion at site.

1.Check the saddle package, if any accessories was lost during transport. 2.Check the diameter and casting marks of the pipe and check the type of model of the saddle, to make sure you use the right products. 3.Thoroughly clean the pipe surface that will use the pipe saddle, brush suitable gasket lubricant for roughened pipes to ensure that the product is well sealed. 4.Loosen the saddle bolt to separate the two part of products. 5.Positioning saddle on the pipe, make sure thread outlet is in the correct position. 6.The bore holes of saddle’s two parts should be aligned to ensure the gasket is parallel to the pipes surface. 7.Tighten the bolt with a wrench as required. The bolt is evenly exchanged with a torque of 15-20 pounds / feet each time.