Bidhaa

Kiunganishi cha kukarabati chuma cha pua FCTR

Nambari ya bidhaa:

OD25-ED300

FCTR ya kukarabati chuma cha pua ni kontakt ya aina ya gia ya pete, ambayo ina utendaji mzuri wa kuziba na nguvu tensile.

Ubunifu maalum unaruhusiwa, karibu kuwasiliana nasi.

Ongea sasa

Kiunganishi cha kukarabati chuma cha pua FCTR

Nambari ya bidhaa:

OD25-ED300

FCTR ya kukarabati chuma cha pua ni kontakt ya aina ya gia ya pete, ambayo ina utendaji mzuri wa kuziba na nguvu tensile.

Ubunifu maalum unaruhusiwa, karibu kuwasiliana nasi.

Ongea sasa

Sehemu Na.	Jina la sehemu	Nyenzo	Kiwango
1	Backplate	SS304	AS4181-2013
2、3	Bolts & karanga	SS304	AS4181-2013
4	Sleeve ya mpira	EPDM	ISO4633
5	Sahani ya chuma ya ganda	SS304	AS4181-2013
6	Bolts	SS304	AS4181-2013

Mafupi na huduma
1	Inafaa kwa PE na bomba zingine zisizo za metaliYFCTR), chuma, saruji, asbesto na vifaa vingine. (FCD), anuwai ya kipenyo cha bomba.
2	Shinikizo la kazi PN10 / PN16.
3	Joto la juu -10 ° C hadi+70 ° C.
4	Inafaa kwa maji yanayowezekana (WRAS kupitishwa), maji yaliyosafishwa na maji taka.

Od	Odmin-odmax	Pn	Wp	L1	L2	D
Ymm）	(mm)	(Bar）	(Bar）	Ymm）	Ymm）	Ymm）
25	31-35	16	16	150	200	300
32	39-43	16	16	150	200	300
40	48-52	16	16	150	200	300
50	59-63	16	16	150	200	300
65	72-77	16	16	150	200	300
80	88-92	16	16	150	200	300
100	108-114	16	16	150	200	300
125	138-144	16	16	150	200	300
150	165-171	16	16	150	200	300
200	216-222	16	16	150	200	300
250	270-276	16	16	150	200	300
300	318-326	16	16	150	200	300

1.FCTR Stainless Steel Repair Clamps is ring gear type pipe connector, which has strong sealing performance and tensile strength. It is used to connect PE and other non-metallic pipes. Its ring gear design can play a good role in anti-seismic, anti impact and noise reduction in pipe connection. 2. The simplicity and versatility of this product makes the product very easy to install and the entire line can be installed in a stressful manner. It eliminates the need to shut down the entire line during the product installation, can bring great convenience to customers. 3. Product design and manufacture according to BS, EN, ISO9001:2008 system and surface anti-corrosion material through the most stringent WRAS certification, so it can be used for drinking water. 4. We provide EPDM, SBR, NBR rubber pad and carbon steel/stainless steel bolts for long term rust protection.

1. The main function of this product is to open a branch pipe or install the faucet or water meter in any part of the pipeline temporarily after the completion of the installation of the whole pipeline and already running. Quick removal of the product, the installation of only one wrench, torque wrench to tighten high-strength steel or stainless steel connection bolt is one of the most important features of the series. 2. This product is specially designed for connecting DI pipes. The connect range is from DN50-DN315.The customer has some special requirements for the product that can also be designed and manufactured to meet customer requirements. 3. The simplicity and versatility of this product makes the product very easy to install and the entire line can be installed in a stressful manner. It eliminates the need to shut down the entire line during the entire product installation without the interruption for pipeline, can bring great convenience to customers. 4. Product design and manufacture according to BS, EN, ISO, 9001:2008 system and surface anti-corrosion material through the most stringent WRAS certification, so it can be used for drinking water. 5. We provide EPDM, SBR, SBR rubber pad and carbon steel/stainless steel bolts for long term rust protection.

1.Check the saddle for damage, if any accessories was lost during transport. 2. Check the diameter and range of the pipe And check the type of model of the saddle, to make sure you use the right products. 3.Thoroughly clean the pipe surface that will use the pipe clip. Suitable gasket lubricant for roughened pipes to ensure that the product is well sealed. 4.Loosen the saddle bolt and bolt to separate the two part of products. 5. Positioning saddle on the pipe, thread outlet is in the correct position. 6.The next two parts of saddle should be alignment bolts holes and tighten the bolts to ensure that the gasket is parallel with the external. 7. Tighten the bolt and tighten the bolt with a wrench as required. The bolt is evenly exchanged with a torque of 15-20 pounds / feet each time.

Bidhaa

Kiunganishi cha kukarabati chuma cha pua FCTR

Nambari ya bidhaa:

OD25-ED300

Kiunganishi cha kukarabati chuma cha pua FCTR

Nambari ya bidhaa:

OD25-ED300

Mchakato wa huduma

Usindikaji wa kawaida

Vifaa vya ghala

Utoaji

Mafunzo ya mwongozo wa ufungaji

Aina za bidhaa

Wasiliana nasi

Kampuni hiyo inazalisha viunganisho mbali mbali vya bomba, ina timu ya kitaalam ya R&D, na ina sifa ya muda mrefu katika uwanja wa bomba la kimataifa.

Viungo vya haraka

Aina za bidhaa

Aina za bidhaa

Hakimiliki © conflex.